Test Chambers

Product Details:

We are engaged in offering a wide range of Fumigation Chamber to our valuable clients. We use optimum quality material and latest technology in the manufacturing process. Our offered product is checked against various parameters under the vigilance of our quality controllers to deliver a flawless range at the client's end. Apart from this, offered chambers are available in standard as well as customized specifications as per requirement of our clients.

Features:

• Fumigation Chamber is ideal for sterilization and deacidification of documents and books and allied materials carrying out documentary heritage.
• The double walled unit has outer made of cold rolled steel sheet duly powder coated
• Inner chamber and perforated shelves are made up of stainless steel
• Meant for fumigating specimens with insecticide for preservation
• Specimens may be placed in the chamber, insecticide sprayed and the lockable airtight door be closed
• Air circulating fan is provided on one side which helps in rotating the insecticide fumes throughout the chamber properly
• The perforated sheet is used when small specimens are to be fumigated. First small specimens may be placed in chamber, then the perforated sheet placed in the chamber and the specimens kept on it followed by the process of spraying the insecticide and switching on the fan.
• Available with and without temperature control arrangement
• Temperature controlled models are fitted with Microprocessor Based Digital Temperature Cum Indicator
• To work on 220/230V AC. Supply

Model Overview:

Applications:

• Fumigation Chambers are ideal for sterilization and deacidification of documents and books and allied materials carrying out documentary heritage
• Double walled unit has outer made of cold rolled steel sheet duly powder coated and Inner chamber and perforated shelves are made up of stainless steel
• Meant for fumigating specimens with insecticide for preservation

Additional Information:

• Delivery Time: 2-3 weeks

Product Details:

We are engaged in offering a wide range of Stainless Steel Fumigation Chamber to our clients. Our range of all products is widely appreciated by our clients

Product Details:

Stability Test Chamber made Of Mild Steel Sheet Powder Coated, PUF Insulated, The Unit Has Inner Plexiglass Door And Outside Metal Door With Magnetic Gasket, Lock & Key, Perforated Stainless Steel Trays, Caster Wheels For Mobility. Inside Chamber Fitted With Blower To Motor. Fitted With Microprocessor Based PID Controller For Temperature And Humidity. The Cooling System Consists Of Hermetically Sealed Compressor.

Temperature Range:

• 10 Degree C to 60 degree C (Accuracy: 0.2o C)

Humidity Range:

• 40% to 95% RH (Accuracy: 1%)

Accurate Micro processor Based Humidity Control System:

• The LABSOL” Stability Chamber uses a microprocessor based; electronic humidity sensor detector is an exact logarithmic function of the humidity concentration in the environment of the chamber between source and detector.

Illumination:

• Our photo stability chamber conforms to the illumination requirement as per the International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use.

Insulation:

• The gap of 75 mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses.

Mineral Glass Wool Insulation:

• Glass mineral wool is one of the most environmentally friendly, stable and sustainable insulants available. Glass wool is incombustible by nature. Euro class classification is A.

Air circulation:

• Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber

Features of Coaxial Circulation Fan:

• Vacuum impregnated stator winding with dr. back varnish under red baktol
• Non-hygroscopic
• Best IR value
• Bright bar (EN - 8 class) shaft
• Bush bearing of branded companies
• Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator
• Pressure die-casted-rotor manufactured with zero error
• Boats of high accuracy

Specifications:

Product Details:

Applications :

These equipments are used for climatic & durability tests of electrical & electronic components, corrosion test on mechanical assemblies, materials for simulated tropical & extreme tropical conditions.

 Construction :

LABSOL Burn In Chamber are suitable for continuous use and durable. They are constructed from CRCA sheets of suitable gauge. Angle iron frames are provided for bigger Burn-In-Chamber. The Burn-In-Chamber are triple walled and the gap between the walls is filled with resin-bonded glass wool slabs.
Inner Chamber Sheet Thickness 1.2 mm. Inner Chamber Sheet Material MS. Outer Chamber Sheet Thickness 1.2 mm. Outer Chamber Sheet Material CRCA epoxy powder coated. Middle Chamber Sheet Thickness 1.2 mm. Insulation Material Glass + Ceramic wool. Insulation Material Thickness 60 mm.

 Temp. Range :

Temp Range : 100°C Accuracy : 0.2°C Uniformity : +1°C

Additional Information:

• Delivery Time: 3-4 WEEKS

Product Details:

We are offering Climate Chamber to our clients with high quality of range. Our products are highly appreciated by customers.

Product Details:

Features:

• Heating: Indirect heating system is provided in our units, comprising of Stainless steel sheathed air heaters of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity..The heaters will be placed in the conditioning plenum such that there is no direct radiation from the heaters onto the test specimen. Heater outputs are controlled through a SSR for superior stability and control in temperature
• Cooling: We use ISI marked high end High Capacity ultra-low temperature Semi – Hermetic. The compressors are mounted on anti vibration pads for better physical stability and Eco friendly Non-CFC refrigerant R-404a is used. An air-cooled condenser specially designed for tropical climates is driven by a co-axial fan. The heat exchanger coils are Inner grooved copper tubes and are finned for maximum heat transfer. For special purposes hot gas bypass systems are used for protection against No-Load condition
• Temperature Range: Temperature range of our standard Chamber is 0o c to 90o c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers.
• Temperature Sensitivity: Temperature inside our walk-in incubator are controlled with a sensitivity of + 1 o c or better.
• Illumination: Our units are provided with door operated illumination system comprising of fluorescent lights
• Humidity Range: 20% to 80% (Humidity Applicable as per the Temperature Humidity Graph Attached)

Humidification:

• Humidity inside the chamber us provided by steam generated through heating water with the help of immersion type heater. A water reservoir is provided in the machine with heaters and controls for this purpose, to achieve 90 to 96% + 3% RH (non adjustable ) If desired the same can be done through aerosol humidifier.

Front Panel:

• Front panel of our units comprises of on/off switches , HMI Screen ,heating, cooling and mains indicator lamps & temperature controllers

Safety Features:

• Chambers are provided with safety cut offs and alarms at centrally located places including one at the gate
• Special door lock is provided which can be opened from inside even if locked from outside
• An emergency bell switch is also provided inside the chamber
• Dedicated Safety system to shut off the humidity system and chamber shut down in case of overshoot or undershoot of temperature or humidity with audio-visual alarm.
• The thermostatic safety system is provided as an additional safety feature
• Low water level cut off for humidity system
• Door open alarm
• Works on 220V AC Single phase 50 Hz

Additional Information:

• Item Code: LBS-WEC-160

Product Details:

We are offering Test Chambers to our clients with high quality of range. Our products are highly appreciated by customers.

Product Details:

Based on the skills of our adroit professionals and creative workers, we bring forth an extensive range of Plant Growth Chamber. Owing to features like durability and easy installation, the offered range is extensively demanded in various industries. A team of our skilled professionals, with a wide experience manufacture the offered chambers using high grade raw material and modish technology. The offered chambers are available with us in various sizes, shapes, designs and other related specifications.

Features:

• Oriented design of shelves makes you adjust each space of shelves without difficulty
• With a solid see through double walled door and a full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature
• Front double walled door is provided with lock and key arrangement
• Caster wheel mounted for easy portability
• Excellent quality magnetic gum packing door gasket for external door
• Door operated illumination lamp is fitted inside the chamber for easy visibility
• Foamed-in-Place PUF insulation ensures thermal stability and reduces electrical energy consumption
• Forced air circulation at triple walled back by durable coaxial blower, maintains optimum temperature uniformity and homogeneity
• Exterior illumination with the help of fluorescent lamps/tubes accounts for artificial daylight conditions
• Finned tube evaporator facilitates uniform and faster cooling effects
• Safety Thermostat to prevent overheating
• Fitted with Electronic Digital Voltmeter
• Works on 220/230 Volts AC (50/60 Hz frequency)

Specifications:

Product Details:

We are offering Walk In Plant Growth Chamber to our clients with high quality of range. Our products are highly appreciated by customers.

Product Details:

We are offering Laboratory Chamber to our clients with high quality of range. Our products are highly appreciated by customers.