Product Details:
Brand | Labsol |
Cabinet Material | Wooden,Stainless Steel,Cold Rolled Steel Powder Coated |
Electric Supply | AC 230V,50/60Hz |
Noise Level | Less than 65 db |
Power | Electric |
Work Table | Stainless Steel (SS-304 grade) |
View Window | In work chamber to monitor the samples |
Main Filter | HEPA Filter (99.97% efficient at 0.3 micron particles) |
Pre-Filter | High efficiency pre-filter (Washable) |
Sterilization | By U. V. GermicidalTube in work area |
Manometer | Static pressure analogue type |
Sliding Sash | Counter balanced door for effortless operation |
Noise Level | Less than 65 db |
Standard Accessory | Gas/Air cock and Multipoint 15/5Amp. electric socket |
Optional Features | |
Static Pressure Manometer | Inclusive |
Exhaust Ducting | Per running feet cost will be charged extra |
HEPA Filtration exhaust | Inclusive |
Virus burn out at Exhaust | Inclusive |
Magnehelic pressure differential gauge | to track filter pressure in lieu of static pressure manometer (Can be provided at an extra cost) |
Interlocking of U.V. germicidal tube &fluorescent light | with auto switch off/on mode for motor blower when the door is closed/open |
Hour meter totalizer for U.V. light | Can be done at an extra cost |
Glove Ports and Gauntlets | Inclusive |
Electronic filter choke alarm (Differential pressure monitor). | Can be done at an extra cost |
Microprocessor LCD controller | With auto switch off mode for motor blower when door is closed |
Digital buzzer timer | Sounds an audio alarm on completion of sterilizing time of the chamber |
Additional Information:
Product Details:
Noise Level | Less than 60db |
Frequency | 50 Hz Single Phase |
HEPA Filters | Glass pleated non woven fabric filter having 99.97% efficiency 0.3 micro particles size. |
Air Flow | Unidirectional |
Blower Assembly | Centrifugal lubricated bearing type ISI marked assembly |
Illumination | Fluorescent light illumination greater than 800 lux on work table |
Control Panel | Membrane type soft touch key pad |
Nominal voltage | 220-230 Volts |
Power Requirements | 500 watts- 750 watts (Model specific) |
Add on features | Gas/air/vacuum line cock |
Constructions | Class II |
Cleanliness (Class) | 90 ft/min +/- 20 feet |
Construction Material | Industrial grade mica clad wooden board/M.S./S.S. |
Table | Stainless steel sheet table of ss-304 grade |
Per Filters | Washable pre-filter unit |
Additional Information:
Product Details:
Cabinet Material | Stainless Steel |
Material | Stainless Steel |
Main Filter | HEPA Filter |
Sterilization | UV Germicidal Tube |
Noise Level | Less than 65 db |
Brand | Labsol |
Labsol Biosafety Cabinets Class I offer the protection to the user and not the product. These cabinets have un re-circulated airflow away from the operator that is discharged to the atmosphere after filtration through a HEPA filter. They provide good operator protection but do not protect the material within the cabinet (the product) from contamination.
The system is designed to meet the standards as per ANSI\ASHRAE 110, Surrogate Powder. These BSCs are commonly used to enclose specific equipment like centrifuges etc or procedures like aerating cultures that potentially generate aerosols. BSCs of this class are either ducted (connected to the building exhaust system) or un-ducted (recirculating filtered exhaust back into the laboratory).
Features:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Labsol |
Usage/Application | A biosafety level (BSL), or pathogen/protection level, is a set of biocontainment precautions requir |
Cabinet Material | Wooden, Stainless Steel |
Main Filter | HEPA Filter |
Sterilization | UV Germicidal Tube |
Noise Level | Less than 65 db |
Features | A biosafety level (BSL), or pathogen/protection level, is a set of biocontainment precautions requir |
We are engaged in manufacturing, exporting and supplying high-quality Biosafety Laboratories.